Round quick-drying glue dispenser Description:
1. Built-in imported motor, the circular dispenser motor can be adjusted for uniform rotation.
2. This dispenser is designed for round (horn) products, with single liquid dispenser and AB double liquid dispenser.
3. With a stable dispensing system, the products that are out of the point are more even.
4. It can set the dispensing delay time and delay time to avoid the "big head" and drawing phenomenon.
5. In order to adjust the position during design, we are equipped with X-Y-Z (front and rear, left and right, up and down) adjustment device. The use is more accurate and efficient.
6. Using the peristaltic motor to directly inhale the vacuum, no need to glue the glue, the electronic pipe compression mode;
7. Its working principle is negative pressure type inhalation, especially suitable for quick-drying glue (such as 502 glue, 406 glue, Loctite 495, Loctite 480, Loctite 454, etc.);
8. The introduction of the Teflon tube directly into the plastic bottle completely solves the phenomenon that the quick-drying plastic needle is easy to dry and easy to block;
9. The computer controls the amount of glue, and the glue is more accurate;
10. With reverse anti-leakage function, and suckback can be adjusted;
11. With forward and reverse pumping function;
12. With digital display function;
13. Standard level signal input interface, can be equipped with automation equipment to control;
14. Dispensing interval setting: 0 seconds - 9.99 seconds;
15. Repeatability: ±0.005%;
.jpg "Round quick-drying glue dispensing machine")
Round quick-drying glue dispensing machine